GeoVision Support

 5.3   GVIP Application and its Suitable Environments

GVIP is suitable for using when there is no fixed IP address in the server site within the environments of PPP Point Protocol communication agreement and LAN. GVIP provides indirect exchange of the dynamic local IP address to the permanent IP address of FTP/ Web server site. The remote client can then access the local GV-series server via IE Browser or Netscape Browser...etc

 Notice :

GVIP provides indirect exchange of the dynamic local IP address of A-PC and B-PC to the permanent IP address of GEO server (FTP/Web) site. The remote client can then access the local GV-series server via IE Browser or Netscape Browser...etc. Execute Web Cam Server program and set up the IP address of Gateway computer, Video Server Port and Video Output Port. Please refer to the NAT Transfer diagram and WebCam Server Program for set up.
 

Step 1:   Install the software of GVIP in your host computers of GV-series and execute GVIP program.

Step 2:  Key in the desired FTP Login Address[66.149.10.172ault] to apply the default IP address of proxy server. Key in desired [user name] Key in the [password] The default Port number is 21 and it can be changed to desired number. Set up desired [Login path] Tick on [Auto Run] to execute GVIP automatically after power on the PC. After press ok, you will see the status showing successful connection-- [01/06 13:12:26 Success]

Using WebCam Server program for Gateway Setup

GVIP provides indirect exchange of the dynamic local IP address of A-PC and B-PC to the permanent IP address of GEO server (FTP/Web) site. The remote client can then access the local GV-series server via IE Browser or Netscape Browser…etc. Client's PC, A-PC and B-PC are located within the identical LAN environment. The Browser redirects the signals to the FTP and WWW Geo Server which connect to A-PC and B-PC. Please refer to the NAT transfer diagram and WebCam Server Program for set up.

Step 1. Install the software of GVIP in your host computers of GV-series

Step 2:   Key in the desired FTP Login Address [66.149.10.172] Tick on [Default] to apply the default IP address of proxy server. Key in desired [user name] Key in the [password] The default Port number is 21 and it can be changed to desired number. Set up desired [Login path] Tick on [Auto Run] to execute GVIP automatically after power on the PC. After press ok, you will see the status showing successful connection -- [01/06 13:12:26 Success]

GVIP is not so suitable for using when Client desires to access the Gateway computer within the LAN environment from "outside of the company LAN". The Gateway IP is 64.221.157.239 which has permanent value. Other computers within the company LAN have dynamic IPs. Thus, GVIP is not necessary for using when Client wishes to access the permanent Gateway IP for NAT Transfer. However, it is still possible to use GVIP to connect to Gateway computer by opening up Http Port, Video Server port and Video Output Port.
 

Step 1: Enable WebCam server

Step 2 : Open IE. and/or Netscape browser and key in the IP address of Geo-server from the remote PC site (Client), the FTP catalogue image will appear, then click on the desired FTP website, then you are linked to the desired WebCam viewing area.

PC 1

Set up [ IP address ] : 192. 168. 1.100 on net and set 80 as default of [Http Port], set 4550 as default value of [ Video Server Port ], and set 5550 as default value of [ Video Output Port ]

PC 2

Set up [ IP address ] : 192. 168. 1.101 on net and set 81 as default of [Http Port], set 4551 as default value of [ Video Server Port ], and set 5551 as default value of [ Video Output Port ]

Each PC must have 3 ports available in public for data transfer. In order to control the desired PC, please set up WebCam Server in the Gate Way computer for NAT Translation. (please consult with MIS management team of your company and refer to the following NAT transfer diagram and WebCam Server Program for set up.)

Step 1: HTTP Port, Video Server Port, Video Output Port have been set up in different PCs and        WebCam Server program is used to remote control different PCs.

Application:

Users can use IE or Netscape Browser to browse the website. Through the technique of exchanging IP address from dynamic IP of the local GV-series server to the permanent IP of FTP Server/Web Server, users are allowed to connect to the local host computers.

(Return)