GeoVision Support

  2.1  Please make sure the GeoVision camera input ports are "activated" and "show" is checked on the GeoVision software. Please make sure that the first two ports are connected with active video. Then, you can connect other ports at random.

If the first port is not connected, you might not be able to view video from other ports at all. If the second port is not connected, it might take almost 4 seconds or more to view videos from even numbered ports, i.e. ports 4,6,8,10, etc. However, once you are able to view the video on any ports, they will act "normal" from there onwards. Motion detect works immediate and fine.

(Return)